Book Appointment Now
Super-dispersed TiO2 masterbatch
DW1070
A PE-carrier masterbatch developed for blown-film applications where dispersion, printability and heat-seal performance matter.
70%TiO2 guaranteed value
2.20Density · g/cm³
PECarrier resin
Technical specifications
DW1070 parameters
The values below apply only to DW1070 and its film-focused formulation.
| Item | Value | Unit | Notes |
|---|---|---|---|
| Product form | White granules | — | Super-dispersed rutile TiO2 masterbatch |
| TiO2 content | 70 | % | Guaranteed value |
| Carrier | PE | — | Polyethylene carrier |
| Density | 2.20 | g/cm³ | Product specification |
| Carrier melting point | 110 | °C | Carrier reference |
| MFI | 5 | — | Current TDS must confirm the unit and test conditions |
| Film-blowing temperature | 150–160 | °C | General reference; adjust for resin, equipment and product requirements |
| Recommended addition rate | Application test | — | Confirm against resin, whiteness, opacity, printing and sealing targets |
Technical note: Website values support product selection. Contract and acceptance values must follow the current TDS, COA and agreed test conditions.
Core applications
Designed around demanding blown film.
DW1070 is the preferred starting point when film performance involves printing, sealing or lamination.
Printed film
For blown-film products where the surface must remain suitable for downstream printing.
Heat-seal & laminated film
For higher-end film structures where printability and sealing performance are part of the selection criteria.
White packaging film
For bags and protective or packaging films requiring reliable dispersion, whiteness and opacity.
Choose DW1070 when
Printing and sealing come first.
- The product is made by blown-film processing.
- The film will be printed, heat sealed or laminated.
- Dispersion and hiding performance must remain stable through film production.
Selection boundary
Do not select by TiO2 percentage alone.
Higher TiO2 content does not automatically mean a better fit. When printing, sealing or film dispersion is required, the formulation and process compatibility of DW1070 take priority over simple content-based cost comparison.
Processing reference
Validate the complete film system.
Processing recommendations must be adjusted to the customer’s resin, equipment and finished-product requirements.
Temperature: 150–160°C is the general blown-film reference range.
Equipment: Current target customers commonly use single-screw lines.
Pre-drying: Generally not required; reassess for special storage, resin or environmental conditions.
Trial: Confirm addition level, color, opacity, printing and sealing through application testing.
Evaluate DW1070 for your film application.
Share your resin, equipment, film structure and print/seal requirements with our technical team.